attiny13 datasheet

attiny13 입니다. 간단한 인터럽트, adc 정도를 이용하기 위해 사용합니다.

프로그램 용량이 얼마안되서 통신을 간단하게 해야합니다.

attiny13.pdf

Features

• High Performance, Low Power AVR® 8-Bit Microcontroller

• Advanced RISC Architecture

– 120 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

• Non-volatile Program and Data Memories

– 1K Byte of In-System Programmable Program Memory Flash

Endurance: 10,000 Write/Erase Cycles

– 64 Bytes In-System Programmable EEPROM

Endurance: 100,000 Write/Erase Cycles

– 64 Bytes Internal SRAM

– Programming Lock for Self-Programming Flash Program and EEPROM Data

Security

• Peripheral Features

– One 8-bit Timer/Counter with Prescaler and Two PWM Channels

– 4-channel, 10-bit ADC with Internal Voltage Reference

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

• Special Microcontroller Features

– debugWIRE On-chip Debug System

– In-System Programmable via SPI Port

– External and Internal Interrupt Sources

– Low Power Idle, ADC Noise Reduction, and Power-down Modes

– Enhanced Power-on Reset Circuit

– Programmable Brown-out Detection Circuit

– Internal Calibrated Oscillator

• I/O and Packages

– 8-pin PDIP/SOIC: Six Programmable I/O Lines

• Operating Voltage:

– 1.8 - 5.5V for ATtiny13V

– 2.7 - 5.5V for ATtiny13

• Speed Grade

– ATtiny13V: 0 - 6 MHz @ 1.8 - 5.5V, 0 - 12 MHz @ 2.7 - 5.5V

– ATtiny13: 0 - 12 MHz @ 2.7 - 5.5V, 0 - 24 MHz @ 4.5 - 5.5V

• Industrial Temperature Range

• Low Power Consumption

– Active Mode:

1 MHz, 1.8V: 240μA

– Power-down Mode:

< 0.1μA at 1.8V